The times module contains routines and types for dealing with time using the proleptic Gregorian calendar. It's also available for the JavaScript target.

Although the times module supports nanosecond time resolution, the resolution used by getTime() depends on the platform and backend (JS is limited to millisecond precision).

Examples

import times, os
# Simple benchmarking
let time = cpuTime()
sleep(100) # Replace this with something to be timed
echo "Time taken: ", cpuTime() - time

# Current date & time
let now1 = now()     # Current timestamp as a DateTime in local time
let now2 = now().utc # Current timestamp as a DateTime in UTC
let now3 = getTime() # Current timestamp as a Time

# Arithmetic using Duration
echo "One hour from now      : ", now() + initDuration(hours = 1)
# Arithmetic using TimeInterval
echo "One year from now      : ", now() + 1.years
echo "One month from now     : ", now() + 1.months

Parsing and Formatting Dates

The DateTime type can be parsed and formatted using the different parse and format procedures.

let dt = parse("2000-01-01", "yyyy-MM-dd")
echo dt.format("yyyy-MM-dd")

The different format patterns that are supported are documented below.

Pattern	Description	Example
`d`	Numeric value representing the day of the month, it will be either one or two digits long.	`1/04/2012 -> 1` `21/04/2012 -> 21`
`dd`	Same as above, but is always two digits.	`1/04/2012 -> 01` `21/04/2012 -> 21`
`ddd`	Three letter string which indicates the day of the week.	`Saturday -> Sat` `Monday -> Mon`
`dddd`	Full string for the day of the week.	`Saturday -> Saturday` `Monday -> Monday`
`h`	The hours in one digit if possible. Ranging from 1-12.	`5pm -> 5` `2am -> 2`
`hh`	The hours in two digits always. If the hour is one digit, 0 is prepended.	`5pm -> 05` `11am -> 11`
`H`	The hours in one digit if possible, ranging from 0-23.	`5pm -> 17` `2am -> 2`
`HH`	The hours in two digits always. 0 is prepended if the hour is one digit.	`5pm -> 17` `2am -> 02`
`m`	The minutes in one digit if possible.	`5:30 -> 30` `2:01 -> 1`
`mm`	Same as above but always two digits, 0 is prepended if the minute is one digit.	`5:30 -> 30` `2:01 -> 01`
`M`	The month in one digit if possible.	`September -> 9` `December -> 12`
`MM`	The month in two digits always. 0 is prepended if the month value is one digit.	`September -> 09` `December -> 12`
`MMM`	Abbreviated three-letter form of the month.	`September -> Sep` `December -> Dec`
`MMMM`	Full month string, properly capitalized.	`September -> September`
`s`	Seconds as one digit if possible.	`00:00:06 -> 6`
`ss`	Same as above but always two digits. 0 is prepended if the second is one digit.	`00:00:06 -> 06`
`t`	`A` when time is in the AM. `P` when time is in the PM.	`5pm -> P` `2am -> A`
`tt`	Same as above, but `AM` and `PM` instead of `A` and `P` respectively.	`5pm -> PM` `2am -> AM`
`yy`	The last two digits of the year. When parsing, the current century is assumed.	`2012 AD -> 12`
`yyyy`	The year, padded to at least four digits. Is always positive, even when the year is BC. When the year is more than four digits, '+' is prepended.	`2012 AD -> 2012` `24 AD -> 0024` `24 BC -> 00024` `12345 AD -> +12345`
`YYYY`	The year without any padding. Is always positive, even when the year is BC.	`2012 AD -> 2012` `24 AD -> 24` `24 BC -> 24` `12345 AD -> 12345`
`uuuu`	The year, padded to at least four digits. Will be negative when the year is BC. When the year is more than four digits, '+' is prepended unless the year is BC.	`2012 AD -> 2012` `24 AD -> 0024` `24 BC -> -0023` `12345 AD -> +12345`
`UUUU`	The year without any padding. Will be negative when the year is BC.	`2012 AD -> 2012` `24 AD -> 24` `24 BC -> -23` `12345 AD -> 12345`
`z`	Displays the timezone offset from UTC.	`UTC+7 -> +7` `UTC-5 -> -5`
`zz`	Same as above but with leading 0.	`UTC+7 -> +07` `UTC-5 -> -05`
`zzz`	Same as above but with `:mm` where mm represents minutes.	`UTC+7 -> +07:00` `UTC-5 -> -05:00`
`zzzz`	Same as above but with `:ss` where ss represents seconds.	`UTC+7 -> +07:00:00` `UTC-5 -> -05:00:00`
`g`	Era: AD or BC	`300 AD -> AD` `300 BC -> BC`
`fff`	Milliseconds display	`1000000 nanoseconds -> 1`
`ffffff`	Microseconds display	`1000000 nanoseconds -> 1000`
`fffffffff`	Nanoseconds display	`1000000 nanoseconds -> 1000000`

Other strings can be inserted by putting them in ''. For example hh'->'mm will give 01->56. The following characters can be inserted without quoting them: : - ( ) / [ ] ,. A literal ' can be specified with ''.

However you don't need to necessarily separate format patterns, as an unambiguous format string like yyyyMMddhhmmss is also valid (although only for years in the range 1..9999).

Duration vs TimeInterval

The times module exports two similar types that are both used to represent some amount of time: Duration and TimeInterval. This section explains how they differ and when one should be prefered over the other (short answer: use Duration unless support for months and years is needed).

Duration

A Duration represents a duration of time stored as seconds and nanoseconds. A Duration is always fully normalized, so initDuration(hours = 1) and initDuration(minutes = 60) are equivalent.

Arithmetic with a Duration is very fast, especially when used with the Time type, since it only involves basic arithmetic. Because Duration is more performant and easier to understand it should generally preferred.

TimeInterval

A TimeInterval represents an amount of time expressed in calendar units, for example "1 year and 2 days". Since some units cannot be normalized (the length of a year is different for leap years for example), the TimeInterval type uses seperate fields for every unit. The TimeInterval's returned from this module generally don't normalize anything, so even units that could be normalized (like seconds, milliseconds and so on) are left untouched.

Arithmetic with a TimeInterval can be very slow, because it requires timezone information.

Since it's slower and more complex, the TimeInterval type should be avoided unless the program explicitly needs the features it offers that Duration doesn't have.

How long is a day?

It should be especially noted that the handling of days differs between TimeInterval and Duration. The Duration type always treats a day as exactly 86400 seconds. For TimeInterval, it's more complex.

As an example, consider the amount of time between these two timestamps, both in the same timezone:

2018-03-25T12:00+02:00

2018-03-26T12:00+01:00

If only the date & time is considered, it appears that exactly one day has passed. However, the UTC offsets are different, which means that the UTC offset was changed somewhere in between. This happens twice each year for timezones that use daylight savings time. Because of this change, the amount of time that has passed is actually 25 hours.

The TimeInterval type uses calendar units, and will say that exactly one day has passed. The Duration type on the other hand normalizes everything to seconds, and will therefore say that 90000 seconds has passed, which is the same as 25 hours.

Imports

strutils, math, options, winlean, time_t

Types

Month = enum mJan = (1, "January"), mFeb = "February", mMar = "March", mApr = "April", mMay = "May", mJun = "June", mJul = "July", mAug = "August", mSep = "September", mOct = "October", mNov = "November", mDec = "December"

Represents a month. Note that the enum starts at 1, so ord(month) will give the month number in the range 1..12. Source Edit

WeekDay = enum dMon = "Monday", dTue = "Tuesday", dWed = "Wednesday", dThu = "Thursday", dFri = "Friday", dSat = "Saturday", dSun = "Sunday"

Represents a weekday. Source Edit

DateTimeLocale = object MMM*: array[mJan .. mDec, string] MMMM*: array[mJan .. mDec, string] ddd*: array[dMon .. dSun, string] dddd*: array[dMon .. dSun, string]